Zinc Plating Dmitriy's Struts

After what seems like way too much time, I finally got all of Dmitriy's strut housings welded together, so as mentioned in my first post about them, they're now ready for plating. Since the threads cannot be painted or powdercoated because not only would either of those processes add too much material to allow the threads to work, but as soon as it got chipped or scratched (as it would because they're threads), the underlying metal would begin to rust immediately. Zinc plating is different because it's actually a sacrificial layer and will corrode before the base metal around it does, even if it isn't completely covering it. That's why you find this kind of plating on fasteners as well as steel brackets that might be exposed to harsh environments.

I ended up ordering a zinc plating kit from Caswell Plating after reading a lot of positive reviews of their product. The kit comes with all of the chemicals required, some heaters, some buckets and you pretty much just add tons and tons of distilled water.

This isn't all of it

I did actually have to take a trip to Home Depot to get some other things like muriatic acid and a bucket to keep the acid in and a spray bottle...but it was all pretty inexpensive and readily available stuff. For lack of any better place to do it, I set up all of my buckets and electrical stuff along the wall of my garage on the side of my Starlet that I'm not currently working on. I really need a bigger garage.

Um...don't worry, I'm a professional

After dipping things here and applying electricity there and spraying stuff, I managed to get the part cleaned and plated with a delicious layer of zinc. Then, it went into a quick blue chromate dip to seal the zinc and improve its corrosion resistance (I don't pretend to understand how chemistry works) and bam! we have this super sweet plated part!

It's actually a crazy iridescent blue, but the photo doesn't really capture it. I guess that's still my fault.

You can see in the picture that it has a little bit of plating all the way to the end of the tube, but I rearranged it slightly in the bucket so it only has significant plating maybe an inch into the mounting tab area. Then, there's the less obvious chromate layer which ends just about 1/4" below the end of the threads. It's not terribly important to plate the whole thing because everything but the threads will end up powdercoated.

That was pretty exciting stuff. Now I just need to do it 5 more times and off it will go to the powdercoater while I finish up all the spring perches. It looks like Dmitriy's making some serious progress on the shell, so I hope I'll have these all ready for him when he needs something to bolt knuckles to.

Doin' Stuff

Well, been out of town many weekends, and was keeping the car together for that Marshall rallycross (what a nice day that was!) but with some time available I've finally been able to do some heavy lifting on the car. Of course, actually doing the work is a lot harder than just recounting the list...but:
1) Removed dash (clearly for the first time ever! previous owner had left it in when building cage...) and cut out the embarrassing door bars

2) Bent and fit tubes for dash bar and new door bars. Wow, metal prices are high now. Also, there's little more satisfying than bending tubes accurate to within a degree with a manual bender. Thank you Matt of Bentmettle for drinking beers and leashing ducks for a day! (and helping me fit tubes a bit).

> $200, but can be shaped into awesome not-kidney-impaling-in-crash door bars and a dash bar (dash done now, only door gussets t0 do). I am really happy with the way they're fit - difficult to tell, but the tubes are offset bent, not intersecting, and are welded together along 6inches under the gusset.


So my workspace is great, but I was still driving the car around with no dash to bend and fit tubes, and later to take advantage of Kenneth's available TIG welder (and awesome welding). It got to a point where I was getting concerned about the amount of gas in the tank, I didn't have any gauges. Pretty fun to drive a car like that though, and to really get the full effect of a simple machine, in this case with a small exhaust leak, so the effect I got was of a ride-on lawnmower...

Unfortunately, I also didn't have gauges to tell me that the alternator was fried. So on my way to work last monday, where I was going to finish welding that afternoon at Kenneth's, the car ran out of electricity. I called Matt with the biggest favor of my life at 8:15am, in the snow (yes, we're in Michigan.) And he saved my ass off the side of the highway. That night, driving home on a charged battery I felt the 'range anxiety' of an electric car! But that medium-sized AGM battery shown in the other posts was a champ, running my car AND headlights for a 10+ mile, 15+ minute drive without apparently struggling at all. I think that the alternator froze during the rear suspension change at snowdrift and then the battery powered it for 15miles of a 20 mile transit that night as well. So very happy with the battery, and the size choice greater than necessary than just starting the car.

And now I'm digging a hole for the best. The engine's coming out.


Rally Ready List:
1) Clean wiring (two words but big ongoing job, hooray weatherpack connectors)
2) Machine strut top plates with additional caster (camber done at the knuckles with eccentric bolts) and spherical bearings, weld to strut tops and cage for reinforce and fix my surprisingly round stock strut tops
3) Rebuild (clean and seals, no revalve) front Bilstein inverted struts
4) Get necessary gauges (obtaining used Audi gauges, VDO oil pressure, oil temp and voltmeter)
5) Set up 9A 2.0L with good clutch and gauge senders, inspect and pull pan, install metal baffle plate. Fix up engine wiring harness, put the best parts from 3 CIS-E systems together for fueling... Get new coolant hoses as necessary
6) Install 2L, install header (beautiful supersprint 4-2-1 stainless, 16 years old used)
7) Install 2002 china-market Chery mechanical HVAC heater core and flapper unit (awesome find, thanks Matt!) to fix heat and also eliminate vacuum lines to the cabin
7) Plumb and run 2L! Please work...
8) Reassemble dash with new gauges
8) Fabricate exhaust header back, with cat at rear in place of muffler
9) Button up car, reassemble and race with 2x current torque under 5000rpm (that's the plan...)
10) Paint & graphics?

So it's a lot to do. Transmission work is notably absent, so open-diff (got a great turn-in!) for now. Gripper differential will be ordered soon, but it's got a 6-week lead time. The trans can be dropped later, and without affecting engine (will be the 3rd transverse motor car I've done THAT on) for diff and final drive. Hm. Exciting.

Dmitriy's Rally Struts

A couple months ago, Dmitriy (who has been mentioned elsewhere as one of our indispensable crew members) asked me if I could put together some rally struts for his FWD Impreza that he is building to run in RallyCar's G2 class (alongside/against Sean and me). I thought about it for a few weeks and surveyed the equipment that I had available to me, and decided that I could pull it off.

The first step was obtaining some dampers. I dug through catalogs of a few damper manufacturers, and found that Bilstein was probably going to be our best bet for rally durability, customizability and price (Bilstein was sort of the plan from the beginning, but I figured I should at least do the legwork). I told Sean what our damper requirements were and set him loose on finding something that matches. After several weeks of phone calls and e-mails, we finally found somebody who didn't think we were totally nuts when we asked about custom valved inverted strut inserts. I think that may have been the hardest part of this project, so I'm glad Sean took care of it.

Meanwhile, I took a bunch of parts from Dmitriy to measure and put into CAD so that I could ensure that the new struts would fit. I got something like this:

Left is stock and Right is...not

The dampers won't be coming for another couple of weeks, so I've just been plugging away at making these things. It's been interesting because the strut tubes are near the limit of what my lathe will do, but it does a pretty good job.

Turning...

Tada!

I've also been making spring perches in a HUGE vertical machining center because it removes material much faster than the lathe does and it does it with one press of a button. They still need to be finished up on the lathe though.

The exciting news is that I just finished up the first strut tube today. The next steps are to plate it so the threads have some protection, and then send it off to powdercoat. Of course I'll wait until all of them are done to do that, but that should happen very very soon.


So that's where I'm at now. I'll update as progress is made, but for the most part it's just duplicating parts so it's not terribly exciting. Meanwhile, check out Dmitriy's build over on SpecialStage (I think it exists in a few other places too, but that's where I keep track of it).

GTI Rallycar Brake System, post 2

Rally Brake System:
Stock master cylinder and brake booster
All new rerun hardline, all AN Flares. SS braided line at each corner
Lines run inside bodywork
Rear corners run from wheel wells to calipers, no hardware mounted on beam
Rear circuit has series bias adjuster and second master cylinder



Above is a current image showing the rear brake line heading through the bias adjuster (before e-brake cylinder) and the e-brake master cylinder setup using the stock lever. We plugged one port in the stock master cylinder up front and ran one line to rear, T after e-brake master cylinder. Works great, note the drilled lever button and pins stored on the lever...

GTI Rallycar Brake System, post 1

One of the items inherited with the car was the stock brake system. Which of course is pretty OK, aside from terrible e-brakes due to a seized cable on one side. So we completely redid it. In retrospect, the e-brake could have been fixed with a new cable, but the greatest gains were the initial asides: the brake bias adjust and system being completely separate from the rear axle have been critical, and I'm thrilled with the simplicity and effectiveness of the new brakes.

The old system is all DIN flares, cross-diagonal setup, brake lines run under the car, and bias adjusted by a lever which measures the rear suspension compression. Many brake components and lines were mounted to the rear beam. Of course, cable e-brake. As it was, with the slightly raised rear ride height, the stock system was heavily biasing towards the front.

The new system is stock master cylinder, all AN flares (every line is completely redone), rear brake line run inside the car, a second master cylinder plumbed in series for the e-brake, and flex lines running from the wheel wells to the calipers, nothing is mounted to the beam.

This was all done at Kenneth's, thank you! I was without garage at the time...

Sno*Drift 2011: More Videos

We made it back home today after a leisurely drive back to Ann Arbor. I'm happy to be home, and I'm sure that my memories of the rally will become fonder as time passes. As it is, I'm half thinking that rally sucks. It's so hard, and I'm not even driving! But I did really enjoy it too, so it's not like I'm going to quit.

Anyway, thanks to Chris for pointing us to a video of our big off from SS14. You can see it here starting at about 7:50



I also uploaded our in-car footage of that entire stage, so you can see what we saw starting at about 6:30 in this video.



Thinking back to it, we really should have just had the spectators push us out and we would have been able to finish the stage, but we're still new to this, and we still would have lost a ton of time in service anyway. It's unlikely that anything would have made our sloppy second day much better.

Sno*Drift 2011 Day 3: SS8 to SS18

We were feeling really good about our results from yesterday, but we were also concerned that with the significantly faster stages today, our power disadvantage would really manifest itself. We definitely weren't able to keep up the blistering pace that we had yesterday.

Even as co-driver, and knowing what corners were coming up, I was just deathly afraid that I'd mis-count the crests and not tell Sean to slow for tight corners when we were going 80-90 mph down long rolling straightaways. Luckily, that didn't happen even though it just meant that we were a little more cautious than we actually needed to be.

Sean had his own problems, as he woke up feeling a bit nauseous and this lasted through most of the day. He couldn't eat or drink without feeling worse, but of course not eating and drinking also made him feel pretty bad.

After establishing that Sean wasn't as comfortable going super fast, we merely went pretty fast. So we weren't way up in the standings like we were yesterday, but we still did ok.

The first service was not terribly eventful, and we ended up just putting on some chemical toe warmers while the crew looked the car over a little. Then we all went over to the Super Special Stage in the Buttles gravel pit. This was a lot like a rallycross, so it was somewhat familiar territory. It was pretty rough though at least right at the beginning, and it may have led to this:

We did pretty well in the Super Special Stage, but after that, things got a little bit sketchier. At the very end of SS14: Camp 8, we were headed downhill toward a very tight right hander, but we didn't slow nearly enough and ended up slamming into a snowbank sideways at 60+ mph. That was terrifying and we both thought we were going to roll the car. Also, we were only about 100 yards from the finish. Luckily, we only debeaded one tire, so we promptly got to work fixing that. Additionally, we happened to be in a huge spectator area with a commentator who said something like "the co-driver can run down the road and get a time," so I did. Running in the snow sucks, and then when I got to the control, they told me that that wasn't actually a rule. Luckily, as I was headed back, I noticed that Sean had gotten the car back together and was coming to pick me up. We ended up losing about 10 minutes on that stage.

The next stage, the 15 mile long Camp 30 was nearly as scary. Again, down a hill into a hard and icy right hander without slowing enough, and we smacked a snowbank with the left side of the car again. This snowbank must have been a bit harder, because now the car didn't drive quite right and made terrible noises when the left rear suspension was compressed. We finished out this crazy long stage and had a look, and we noticed that the wheel suddenly had around 8 degrees of positive camber. We didn't have much choice but to finish the next stage before going to service, so that's what we did.

We texted the crew to look for a new rear beam and rear axles. By the time we got back to service, they had obtained some extra parts from Matt Bushore and we were all ready to fix the car. All of the crew was involved as well as people who weren't even part of our crew like Matt and a couple of spectators who we happened to know. We went way over time on our service, but got the beam, stub axles and brake rotors replaced within an hour, just in time to be able to continue the rally. Like I said before, our crew is amazing.

We finished out the last two stages with some cautious driving just so we could actually finish the rally. Results for the day weren't nearly as good as yesterday's, but we were excited just to finish. I think we did pretty well for our first rally, and just a couple of mistakes in the second half cost us an obscene amount of time. At least we're going home with 2nd place in G2 for the Sno Regional Rally. Next event hopefully will be the New England Forest Rally in July. We'll be making a lot of changes before that event, so watch the blog for details!

Sno*Drift 2011: 2nd in G2!!

Results are here for the Sno Regional Rally, which is just on Friday. We're 2nd Place in G2!! Unfortunately, I screwed up the very first ATC, which cost us a minute, which is the difference between 1st and 2nd place. Still. 2nd place is pretty sweet. Also we're 5th overall for the regional rally.

Here are results for the National guys. We're sitting in 3rd overall for Sno*Attack (you can't actually see that directly. So if Sean just drives smooth, fast and clean like yesterday, we have a very very good shot at being in the money for Sno*Attack, and even possibly taking the lead for the Drift Regional Rally (which is just Saturday).

I'm still working on the video upload because YouTube hates me.

2011 Sno*Drift Day 2: Stages 1-7

We kicked off the morning by attending another mandatory novice seminar, and then we tried to rush to the Practice Stage in the half hour or so that we had left. We got there with 15 minutes to spare and promptly found that we had low pressure in one of our tires, so we spent the whole 15 minutes seeking out a team that would "lend" us some air and eventually didn't get to do practice. Bleh.

While we were gone, our crew found us a really good spot for service in Lewiston, just outside of a nice restaurant/bar. We all hung out in service for a bit as Brandon and Dmitriy cooked up some food and made some coffee.

We were both pretty anxious to get going, so we were pretty happy when it was time to leave Parc Exposé on our way to the first stage.

The stages were great, and we were going even faster than I expected after recce. After a couple of wild corners on SS1, Sean got the hang of driving on the surface and we started going really fast. In fact, we had to make two passes on stage, which was exciting. Here's a video of us running SS3: East Fish Lake.



Somewhere in the middle, we get caught out behind an Open Light Subaru and after some frustration, we passed them in a huge spectator area. It was pretty exciting. By the time we got back to service, everybody had heard about this story and it had really grown in scale. Now people thought that we entered the corner side by side and we almost hit them...and they were 12 feet tall and ate children! It was crazy. We rolled back into service after the infamous Ranch stage which is rough and tight, and really didn't have a lot for the crew to do. The car held up great. We pretty much installed and aimed the lights and checked that all parts and fluids were still present (they were).

And off we went on the night stages. Halfway through SS6 Greasy Fishlab (I love that name), I started feeling a little bit motion sick which sucked. Then, we had a very short transit to SS7 Orchard Lake so I had no time to recover and then we embarked on the longest stage of the rally. I managed to survive and Sean drove admirably with my kind of distant note-reading. I made it all the way to the control at the end of the stage and politely asked if I could use their woods. That sucked, but at least I didn't throw up in the car. I think I'll put on a new Scopolamine patch tonight.

Now we're all very tired, and we resume the second half of the rally tomorrow morning with Parc Exposé in Atlanta at 8AM. I'm excited but apprehensive. Rally is hard. The results haven't been published as of the writing of this post, but I'll try to get them up when they get posted.

Day 1: registration, tech inspection, and recce

We thought we were early when we showed up for recce late registration at 7:30am this morning, maybe even that we'd have time to grab some breakfast. But instead we surprised the volunteers at registration with our intention, and when they had that figured out, they were rushing to get us out in time! Recce is pre-running the stages, at legal speeds and in a non conspicuous car, to get an idea of the course and to clarify the stage notes. This means driving over two days worth or roads, more miles than the trip up in the first place.

So after 6 hours of sleep, no shower food or drink, and what turned into 5.5 hours of driving stages, we finally got a 20min break at Subway. Then we drove for another 2.5 hours until 5pm. Wow, shower and dinner was appreciated, recce is a lot of work. Thankfully, Kyle and Cory took the car to tech, 3rd car through and surrounded by the factory teams. The horn was called "weak and feeble" by the head inspector, but otherwise sailed through.

But the stages look great, it seems there's an interesting technical theme the first day, and a more open and higher speed second day. I'm sure the roads will get swept down, and it won't be as soft as today when the temps go down to the high teens this weekend, but it's no skating rink. And I'm looking forward to driving without cringing at every rut. I thought I might garage the R32 for the winter when I first bought it, certainly nothing like this: